March 23, 2001
Perturbation theory, simulations and scaling arguments predict that there should be no static friction for two weakly interacting flat atomically smooth clean solid surfaces. The absence of static friction results from the fact that the atomic level interfacial potential energy is much weaker than the elastic potential energy, which prevents the atoms from sinking to their interfacial potential minima. Consequently, we have essentially two rigid solids, for which the forces at randomly distributed "pinning sites" cancel. It is shown here that even fluctuations in the concentration of atomic level defects at the interface do not account for static friction. It is also argued that the sliding of contacting asperities, which occurs when the problem is studied at the multi-micron length scale, relative to each other involves the shearing of planes of atoms. Since this results in a force for the interaction of two asperities which varies over sliding distances of the order of an atomic spacing, the contacting asperities at the surface are able to sink to their interfacial potential minima, with negligible cost in elastic potential energy. This results in static friction.
Similar papers 1
October 14, 2003
It is proposed that lubricant molecules adsorbed on an interface between two asperities in contact, which is rough on the atomic scale, can switch the interface from the strong to weak pinning regime, resulting in a large reduction in the static friction. This is proposed as a possible mechanism for boundary lubrication. \
June 29, 2020
The friction of a nanosized sphere in commensurate contact with a flat substrate is investigated by performing molecular dynamics simulations. Particular focus is on the distribution of shear stress within the contact region. It is noticed that within the slip zone, the local friction coefficient defined by the ratio of shear stress to normal pressure declines monotonically as the distance to contact center increases. With the lateral force increasing, the slip zone expands i...
May 13, 2008
It is shown on the basis of scaling arguments that a disordered interface between two elastic solids will quite generally exhibit static and "dry friction" (i.e., kinetic friction which does not vanish as the sliding velocity approaches zero), because of Tomlinson model instabilities that occur for small length scale asperities. This provides a possible explanation for why static and "dry" friction are virtually always observed, and superlubricity almost never occurs.
November 26, 2021
While friction stems from the fundamental interactions between atoms at a contact interface, its best descriptions at the macroscopic scale remain phenomenological. The so called "rate-and-state" models, which specify the friction response in terms of the relative sliding velocity and the "age" of the contact interface, fail to uncover the nano-scale mechanisms governing the macro-scale response, while models of friction at the atomic scale often overlook how roughness can al...
April 28, 2000
A microscopic theory for the ubiquitous phenomenon of static friction is presented. Interactions between two surfaces are modeled by an energy penalty that increases exponentially with the degree of surface overlap. The resulting static friction is proportional to load, in accordance with Amontons' laws. However the friction coefficient between bare surfaces vanishes as the area of individual contacts grows, except in the rare case of commensurate surfaces. An area independen...
July 7, 2021
Traditional laws of friction believe that the friction coefficient of two specific solids takes constant value. However, molecular simulations revealed that the friction coefficient of nanosized asperity depends strongly on contact size and asperity radius. Since contacting surfaces are always rough consisting of asperities varying dramatically in geometric size, a theoretical model is developed to predict the friction behavior of fractal rough surfaces in this work. The resu...
April 4, 2018
Friction is one of the fundamental issues in physics, mechanics and material science with lots of practical applications. However, the understanding of macroscopic friction phenomena from microscopic aspect is still on the way. In this work, molecular dynamic simulations are performed to investigate the static friction between two planar crystal surfaces. The friction force experienced by each atom is tracked and the statistical characteristics of atomic friction force are il...
April 2, 2001
The static friction between crystalline surfaces separated by a molecularly thin layer of adsorbed molecules is calculated using molecular dynamics simulations. These molecules naturally lead to a finite static friction that is consistent with macroscopic friction laws. Crystalline alignment, sliding direction, and the number of adsorbed molecules are not controlled in most experiments and are shown to have little effect on the friction. Temperature, molecular geometry and in...
April 22, 1994
A new method has been proposed to evaluate the frictional force in the stationary state. This method is applied to the 1-dimensional model of clean surfaces. The kinetic frictional force is seen to depend on velocity in general, but the dependence becomes weaker as the maximum static frictional force increases and in the limiting case the kinetic friction gets only weakly dependent on velocity as described by one of the laws of friction. It is also shown that there is a phase...
November 5, 2013
At the molecular scale there are strong attractive interactions between surfaces, yet few macroscopic surfaces are sticky. Extensive simulations of contact by adhesive surfaces with roughness on nanometer to micrometer scales are used to determine how roughness reduces the area where atoms contact and thus weakens adhesion. The material properties, adhesive strength and roughness parameters are varied by orders of magnitude. In all cases the area of atomic contact rises linea...