Electrostatic Engineering of Nanotube Transistors for Improved Performance

Junctionless transistors made of silicon have previously been demonstrated experimentally and by simulations. Junctionless devices do not require fabricating an abrupt source-drain junction and thus can be easier to implement in aggressive geometries. In this paper, we explore a similar architecture for aggressively scaled devices with the channel consisting of doped carbon nanotubes (CNTs). Gate all around (GAA) field effect transistor (FET) structures are investigated for n...

Spatially resolved photocurrent measurements on carbon nanotube field-effect transistors (CNFETs) operated in various transport regimes are reported. It is demonstrated that the photocurrents measured at different biasing conditions provide access to the electronic band structure profile of the nanotube channel. A comparison of the profiles with the device switched into n- or p-type states clearly evidences the impact of chemical doping from the ambient. Moreover, we show tha...

To optimize the performance of multifunctional carbon nanotube-ferroelectric devices, it is necessary to understand both the polarization and charge dynamics effects on their transconductance. Directly comparing ferroelectric Pb(Zr0.2Ti0.8)O3 and dielectric SrTiO3 field effect transistors, we show that the two effects strongly compete, with transient charge dynamics initially masking up to 40% of the ferroelectric field effect. For applications, it is therefore crucial to max...

We present self-consistent, non-equilibrium Green's function calculations of the characteristics of short channel carbon nanotube transistors, focusing on the regime of ballistic transport with ohmic contacts. We first establish that the band lineup at the contacts is renormalized by charge transfer, leading to Schottky contacts for small diameter nanotubes and ohmic contacts for large diameter nanotubes, in agreement with recent experiments. For short channel ohmic contact d...

Field-effect transistors based on band-to-band tunneling (BTBT) have gained a lot of recent interest due to their potential for reducing power dissipation in integrated circuits. In this paper we present a detailed performance comparison between conventional n-i-n MOSFET transistors, and BTBT transistors based on the p-i-n geometry (p-i-n TFET), using semiconducting carbon nanotubes as the model channel material. Quantum transport simulations are performed using the nonequili...

Single-walled carbon nanotubes (SWNTs) have been grown via chemical vapor deposition on high-kappa dielectric SrTiO3/Si substrates, and high-performance semiconducting SWNT field-effect transistors have been fabricated using the thin SrTiO3 as gate dielectric and Si as gate electrode. The transconductance per channel width is 8900 S/m. The high transconductance cannot be explained by the increased gate capacitance; it is proposed that the increased electric field at the nanot...

Power dissipation has become a major obstacle in performance scaling of modern integrated circuits, and has spurred the search for devices operating at lower voltage swing. In this letter, we study p-i-n band-to-band tunneling field effect transistors (TFET) taking semiconducting carbon nanotubes as the channel material. The on-current of these devices is mainly limited by the tunneling barrier properties, and phonon scattering has only a moderate effect. We show, however, th...

Carbon nanotube field-effect transistors (FETs) with passivated coaxial gate structures have been fabricated after growth of contacted suspended single wall nanotubes (SWNTs) and subsequent coating with gate dielectrics. Electron Fabry-Perot interferences are observed in the FETs indicating ballistic transport in the coated structures. Reliable production of high-performance SWNT FETs has been obtained by combining patterned growth of SWNT arrays with feed-back controlled ele...

Carbon nanotube field-effect transistors with sub 20 nm long channels and on/off current ratios of > 1000000 are demonstrated. Individual single-walled carbon nanotubes with diameters ranging from 0.7 nm to 1.1 nm grown from structured catalytic islands using chemical vapor deposition at 700 degree Celsius form the channels. Electron beam lithography and a combination of HSQ, calix[6]arene and PMMA e-beam resists were used to structure the short channels and source and drain ...

We present quantum simulations of carbon nanotube field-effect transistors (CNT-FETs) based on top-gated architectures and compare to electrical characterization on devices with 15 nm channel lengths. A non-equilibrium Green's function (NEGF) quantum transport method coupled with a $\vec{k} \cdot \vec{p}$ description of the electronic structure is demonstrated to achieve excellent agreement with the reported experimental data. Factors influencing the electrostatic control of ...