Frequency locking to a high-finesse Fabry-Perot cavity of a Frequency doubled Nd:YAG laser used as the optical phase modulator

A phase modulated RF current source is applied to an injection locked diode laser operating at $780\unit{nm}$. This produces tunable phase modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity using the Pound-Drever-Hall technique. The Pound-Drever-Hall signal is anti-symmetric about the lock point, despite the presence of significant diode laser amplitude modulation. The stabilized optical transfer cavity is used to frequency stab...

We present a 100 MHz repetition rate Yb-fiber-laser-pumped synchronously pumped optical parametric oscillator (SPOPO) delivering tunable frequency combs covering almost the entire visible spectral range. By intracavity doubling both the signal and idler combs and using collinear residual pump light, nearly continuous tuning over the range of 420-700 nm is achieved with only small gaps near the OPO degeneracy condition. Output powers range from 10 mW to 200 mW, depending on wa...

We present a scheme for locking optical cavities with arbitrary detuning many line widths from resonance using an electro-optic modulator that can provide arbitrary ratios of amplitude to phase modulation. We demonstrate our scheme on a Fabry-Perot cavity, and show that a well-behaved linear error signal can be obtained by demodulating the reflected light from a cavity that is detuned by several line widths.

A power enhancement optical cavity is a compelling means of realizing a pulsed laser with a high peak power and high repetition frequency, which is not feasible using a simple amplifier scheme. However, a precise feedback system is necessary for maintaining the narrow resonance condition of the optical cavity; this has become a major technical issue in developing such cavities. We have developed a new approach that does not require any active feedback system, by placing the c...

We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination...

We demonstrate the use of a flexible digital servo system for the optical stabilization of both the repetition rate and carrier-envelope offset frequency of a laser frequency comb. The servo system is based entirely on a low-cost field programmable gate array, simple electronic components, and existing open-source software. Utilizing both slow and fast feedback actuators of a commercial mode-locked laser frequency comb, we maintain cycle-slip free locking of optically-derived...

The cancellation of high-frequency laser phase noise using feedforward techniques, as opposed to feedback methods, has achieved significant advancements in recent years. However, directly applying existing feedforward techniques to laser systems based on nonlinear conversion still faces substantial challenges. Here, we propose and demonstrate a feedforward scheme that suppresses phase noise in frequency-doubled light by utilizing phase noise information of its fundamental pum...

We report ultra-stable locking of a commercially available extended cavity diode laser to a vibration-insensitive high finesse Fabry-Perot cavity. A servo bandwidth of 2 MHz is demonstrated. The absolute stability of the diode laser after locking is measured with a three-cornered-hat method. The resulting Allan deviation reaches a level of $2.95\times10^{-15}$ at 1 s, corresponding to only 0.93 Hz linewidth, even without vibration isolation of the reference cavity.

We present a stabilization technique developed to lock and dynamically tune the resonant frequency of a moderate finesse Fabry-P\'erot (FP) cavity used in precision atom-cavity quantum electrodynamics (QED) experiments. Most experimental setups with active stabilization either operate at one fixed resonant frequency or use transfer cavities to achieve the ability to tune the resonant frequency of the cavity. In this work, we present a simple and cost-effective solution to act...

We give a simple introduction to the properties and use of ultrastable optical cavities, which are increasingly common in atomic and molecular physics laboratories for stabilizing the frequency of lasers to linewidths at the kHz level or below. Although the physics of Fabry-Perot interferometers is part of standard optics curricula, the specificities of ultrastable optical cavities, such as their high finesse, fixed length, and the need to operate under vacuum, can make their...