Flux Qubits and Readout Device with Two Independent Flux Lines

Fast tuning of the transition frequency of superconducting qubits using magnetic flux is essential, for example, for realizing high-fidelity two-qubit gates with low leakage or for reducing errors in dispersive qubit readout. To apply accurately shaped flux pulses, signal distortions induced by the flux control lines need to be carefully compensated for. This requires their in situ characterization at the reference plane of the qubit. However, many existing approaches are lim...

Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high fidelity single-qubit and two-qubit gates, single-shot readout and state initialization. Here, we present a two-qubit fluxoniu...

Superconducting quantum circuits are promising systems for experiments testing fundamental quantum mechanics on a macroscopic scale and for applications in quantum information processing. We report on the fabrication and characterization of superconducting flux qubits, readout dc SQUIDs, on-chip shunting capacitors, and high-quality coplanar waveguide resonators. Furthermore, we discuss the tunability and fundamental symmetry aspects inherent to all superconducting qubits, wh...

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical source could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired ...

We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of $72\,\%$. We find intrinsic energy relaxation times at the symmetry point of $7\,\mu\text{s}$ and $20\,\mu\text{s}$ and levels of flux noise of $2.6\,\mu \Phi_0/\sqrt{\text{Hz}}$ and $2.7\,\mu \Phi_0/\sqrt{\text{Hz}}$ a...

Scaling up superconducting quantum processors with optimized performance requires a sufficient flexibility in the choice of operating points for single and two qubit gates to maximize their fidelity and cope with imperfections. Flux control is an efficient technique to manipulate the parameters of tunable qubits, in particular to activate entangling gates. At flux sensitive points of operation, the ubiquitous presence of 1/f flux noise however gives rise to dephasing by induc...

We present a readout method for superconducting flux qubits. The qubit quantum flux state can be measured by determining the Josephson inductance of an inductively coupled DC superconducting quantum interference device (DC-SQUID). We determine the response function of the DC-SQUID and its back-action on the qubit during measurement. Due to driving, the qubit energy relaxation rate depends on the spectral density of the measurement circuit noise at sum and difference frequenci...

Current superconducting quantum processors require strategies for coping with material defects and imperfect parameter targeting in order to scale up while maintaining high performance. To that end, in-situ control of qubit frequencies with magnetic flux can be used to avoid spurious resonances. However, increased dephasing due to 1/f flux noise limits performance at all of these operating points except for noise-protected sweet spots, which are sparse under DC flux bias and ...

Constructing a fault-tolerant quantum computer is a daunting task. Given any design, it is possible to determine the maximum error rate of each type of component that can be tolerated while still permitting arbitrarily large-scale quantum computation. It is an underappreciated fact that including an appropriately designed mechanism enabling long-range qubit coupling or transport substantially increases the maximum tolerable error rates of all components. With this thought in ...

We experimentally confirm the functionality of a coupling element for flux-based superconducting qubits, with a coupling strength $J$ whose sign and magnitude can be tuned {\it in situ}. To measure the effective $J$, the groundstate of a coupled two-qubit system has been mapped as a function of the local magnetic fields applied to each qubit. The state of the system is determined by directly reading out the individual qubits while tunneling is suppressed. These measurements d...