In Situ Resistance Measurements of Strained Carbon Nanotubes

AFM manipulation was used to controllably stretch individual metallic single-walled carbon nanotubes (SWNTs). We have found that SWNTs can sustain elongations as great as 30% without breaking. Scanned gate microscopy and transport measurements were used to probe the effects of the mechanical strain on the SWNT electronic properties, which revealed a strain-induced increase in intra-tube electronic scattering above a threshold strain of ~5-10%. These findings are consistent wi...

We show that the band structure of a carbon nanotube (NT) can be dramatically altered by mechanical strain. We employ an atomic force microscope tip to simultaneously vary the NT strain and to electrostatically gate the tube. We show that strain can open a bandgap in a metallic NT and modify the bandgap in a semiconducting NT. Theoretical work predicts that bandgap changes can range between +100meV and -100meV per 1% stretch, depending on NT chirality, and our measurements ar...

We use elastomeric polydimethylsiloxane substrates to strain single-walled carbon nanotubes and modulate their electronic properties, with the aim of developing flexible materials that can sense local strain. We demonstrate micron-scale nanotube devices that can be cycled repeatedly through strains as high as 20% while providing reproducible local strain transduction by via the device resistance. We also compress individual nanotubes, and find they undergo an undulatory disto...

We report on the characterization of torsional oscillators which use multi-walled carbon nanotubes as the spring elements. Through atomic-force-microscope force-distance measurements we are able to apply torsional strains to the nanotubes and measure their torsional spring constants and effective shear moduli. We find that the effective shear moduli cover a broad range, with the largest values near the theoretically predicted value. The data also suggest that the nanotubes ar...

We show that it is possible to detect mechanical bending modes on 1 micron long ropes of single walled-carbon nanotubes suspended between 2 metallic contacts. This is done by measuring either their dc resistance in a region of strong temperature dependence (in the vicinity of superconducting or metal-insulator transition), or their critical current. The vibrations are excited by a radio-frequency electric field produced by an antenna located in the vicinity of the sample. We ...

The photocurrent properties of freely suspended single-walled carbon nanotubes (CNTs) are investigated as a function of uniaxial strain. We observe that at low strain, the photocurrent signal of the CNTs increases for increasing strain, while for large strain, the signal decreases, respectively. We interpret the non-monotonous behavior by a superposition of the influence of the uniaxial strain on the resistivity of the CNTs and the effects caused by Schottky contacts between ...

The objective of the present paper is to investigate the mechanical properties of carbon nanotubes. We use classical molecular dynamics simulation in order to study the effect of external compression, bending and torsion to nanotubes. We find that in the low temperature limit, the nanotubes are resilient, sustaining extreme strain without signs of brittleness or plasticity. For high temperatures and under tension the nanotubes show brittle or plastic behavior.

We have studied the resistance of single-wall carbon nanotubes measured in a four-point configuration with noninvasive voltage electrodes. The voltage drop is detected using multiwalled carbon nanotubes while the current is injected through nanofabricated Au electrodes. The resistance at room temperature is shown to be linear with the length as expected for a classical resistor. This changes at cryogenic temperature; the four-point resistance then depends on the resistance at...

We use electrostatic force microscopy and scanned gate microscopy to probe the conducting properties of carbon nanotubes at room temperature. Multi-walled carbon nanotubes are shown to be diffusive conductors, while metallic single-walled carbon nanotubes are ballistic conductors over micron lengths. Semiconducting single-walled carbon nanotubes are shown to have a series of large barriers to conduction along their length. These measurements are also used to probe the contact...

Nanotubes behave as semi-flexible polymers in that they can bend by a sizeable amount. When integrating a nanotube in a mechanical resonator, the bending is expected to break the symmetry of the restoring potential. Here we report on a new detection method that allows us to demonstrate such symmetry breaking. The method probes the motion of the nanotube resonator at nearly zero-frequency; this motion is the low-frequency counterpart of the second overtone of resonantly excite...