Long-term stabilization of the length of an optical reference cavity

We present a scheme for locking optical cavities with arbitrary detuning many line widths from resonance using an electro-optic modulator that can provide arbitrary ratios of amplitude to phase modulation. We demonstrate our scheme on a Fabry-Perot cavity, and show that a well-behaved linear error signal can be obtained by demodulating the reflected light from a cavity that is detuned by several line widths.

We report in detail the design process and performance of an auto-locking ultra-stable laser with sub-hertz linewidth at the first time. The laser frequency is automatically stabilized to an optical reference cavity with a home-made controller, which is based on a combination of digital circuit and analog circuit. The digital circuit is used for diagnosing and manipulating the state of the ultra-stable laser, and the analog circuit is used for demodulating the discriminate si...

A fundamental parameter to determine how electromagnetic waves interfere is their relative phase. Therefore, achieving a fine control over it enables a wide range of interferometric applications. Existing phase control methods rely on modifying the optical path length by either changing the path followed by the light or by altering the thickness or index of refraction of an optical element in the setup. In this work we present a novel method, based on acousto-optic modulators...

The interrogation of an ultra-narrow clock transition of a single trapped ion for optical frequency metrology requires a laser stabilized to a couple of Hz per second with a linewidth of the same order of magnitude. Today, lasers in the visible have reached the Hz-range in frequency stability, if locked onto a high-finesse, ultra-stable reference cavity. Vertical mounting of the reference cavity can reduce its sensitivity to vibrations as described in \cite{notcutt05}. We hav...

We describe an apparatus for the stabilization of laser frequencies that prevents long term frequency drifts. A Fabry-Perot interferometer is thermostated by referencing it to a stabilized He-Ne laser (master), and its length is scanned over more than one free spectral range allowing the analysis of one or more lines generated by other (slave) lasers. A digital acquisition system makes the detection of the position of all the laser peaks possible, thus producing both feedback...

Length changes due to thermo-mechanical noise originating from, for example, Brownian motion are a key limiting factor of present day state-of-the-art laser frequency stabilization using Fabry-P\'erot cavities. We present a laser-frequency stabilization concept using an optical cavity with a strong slow-light effect to reduce the impact of cavity length changes on the frequency stability. The resulting noise-reduction factor is proportional to the ratio between the light phas...

We report the frequency stabilization of an erbium-doped fiber distributed-feedback laser using an all-fiber based Michelson interferometer of large arm imbalance. The interferometer uses a 1 km SMF-28 optical fiber spool and an acousto optic modulator allowing heterodyne detection. The frequency noise power spectral density is reduced by more than 40 dB for Fourier frequencies ranging from 1 Hz to 10 kHz, corresponding to a level well below 1 Hz^2/Hz over the whole range. It...

We stabilize the idler frequency of a singly-resonant optical parametric oscillator directly to the resonance of a mid-infrared Fabry-P\'erot reference cavity. This is accomplished by the Pound-Drever-Hall locking scheme, controlling either the pump laser or the resonant signal frequency. A residual relative frequency noise power spectral density below 10$^3$ Hz$^2$/Hz is reached, with a Gaussian linewidth of 920 Hz over 100 ms, which demonstrates the potential for reaching s...

Fiber-based optical microcavities exhibit high quality factor and low mode volume resonances that make them attractive for coupling light to individual atoms or other microscopic systems. Moreover, their low mass should lead to excellent mechanical response up to high frequencies, opening the possibility for high bandwidth stabilization of the cavity length. Here, we demonstrate a locking bandwidth of 44 kHz achieved using a simple, compact design that exploits these properti...

Laser power fluctuations can significantly reduce the device performances in various applications. High frequency fluctuations impact the signal-to-noise ratio, while slow variations can reduce the device repeatability or accuracy. Here we report experimental investigations on the power stabilization of a diode laser with an acousto-optic modulator. In the frequency domain the relative power noise is reduced at the level of $2.2\times 10^{-8}$ Hz$^{-1/2}$ in the range 1-100 k...